ZXK50L-1524 Gantry CNC Drilling and Milling Machine

I:Summary

ZXK50L-1524 CNC Granty Drilling And Milling Machine use and performance: used in the mechanical processing in drilling, reaming, reaming, countersunk holes, tapping screw, milling and other processing, used the material such as steel, cast iron, stainless steel workpiece and machine tool with high efficiency and high location accuracy.

II:Features:

1, The machine is mainly composed of table, longmen, slide, spindle box, CNC system, cooling chip removal, automatic lubrication system, hydraulic system and other parts.

2, Machine tool using longmen fixed, the form of a table, machine tool rigidity, effectively reduce the cutting vibration, to improve accuracy and tool life.

3, Machine tool are HT250 cast iron parts, processing by twice before annealing aging to remove the stress, can guarantee the accuracy of machine tool stability.The worktable T slot width is 22 mm, used for clamping workpieces.

4, Machine tool, a total of three nc axes, the bed body is equipped with heavy linear guide, workbench longitudinal motion can be made along the guide rail (x);Gantry beam with a linear guide, Y to slide machine can make lateral movement along the guide rail (Y);Y to slide on the vertical direction with or heavy rail, spindle box slide on the slippery pillow as vertical direction (the z axis), x, Y, z axis is driven by servo motor directly connected ball screw.

5, The spindle box of two gears gear box structure (automatic transmission), driven by spindle servo motor, stepless speed regulation, the torque of 320 nm (you can configure the spindle center inside cold), for BT40 spindle taper hole.

6, Spindle box is equipped with a knife cylinder, convenient and safe tool changer. The spindle taper hole with functions of automatic purging cleaning.The spindle box configuration is equipped with hydraulic balance system.

7, On both sides of the workbench, equipped with automatic chip removal device (2) chip removal .Machine adopts water cooling, cooling tank is equipped with cooling pump for the cold drilling or milling.

8, Cnc by guangzhou nc 980 MDC numerical control system, equipped with electronic hand wheel, equipped with RS232 interface and color LCD screen, Chinese interface, has the man-machine dialogue, error compensation, automatic alarm, fault self-diagnosis function, input can use keyboard mode, easy operation.

9, The X axis and Y axis machine tool is equipped with stainless steel plate shield. Workbench semi-closed protection, meet the drilling or milling coolant injection protection.

10, Machine tool guideway and screw motion pair is equipped with automatic lubricating device

11, Machine tool configuration umbrella 16 knife knife library, stable and reliable automatic tool changer.

III: SPECIFICATION

Product Categories : Drilling And Milling Machine > Gantry CNC Drilling And Milling Center